Writer, The (1985)(Softechnics)(Side B).tzx

Top 10k strings from Writer, The (1985)(Softechnics)(Side B).tzx in <root> / bin / z80 / software / Sinclair Spectrum Collection TOSEC.exe / Sinclair ZX Spectrum - Utilities & Educational / Sinclair ZX Spectrum - Utilities & Educational - [TZX] (TOSEC-v2007-01-01) /

Back to the directory listing

13 NONE
8 "STOP THE TAPE":
4 "STOP THE TAPE"
3 FF
3 ;"INSTALL_CD"
3 #
3
2 number of blank lines to be inserted at
2 abcdefghijklmnopqrstuvwxyz{|}~@
2 UNTITLED
2 Softechnics
2 Selecting this option, the following
2 See manual for a complete explanation.
2 PRINT MERGE
2 Normal print
2 M&df&df&df&df&df
2 M CDMXLCIVX
2 Hilderbay T
2 Hilderbay H
2 Emphasized
2 CR,LF
2 BEL
2 ;"THE WRITER"
2 ;"PRMERGE_CD"
2 ;"PRMERGE"
2 ;"CONV_CDE"
2 ;"COMM_CD"
2 123456789012345
2 Gianluca Carri 85/86
2 !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_#abcdefghijklmnopqrstuvwxyz{|}~@
2 !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
2
1 you type to the tab column. You may exit
1 you insert two control characters in a
1 yAl6Bl6Bl6Bl6Bl6B
1 x);" installed":
1 x)+("MOUSE"
1 wordwrap only when you type source
1 word 'Tape', the cassette interface will
1 within the FIND string. In this way,
1 with the symbol '|'.
1 with 'mail merge' facilities. Almost all
1 will search only for "bank", and not for
1 will pause so that you can change the
1 will be printed. To indicate where THE
1 will be printed. If, as in the default
1 will be printed on the first line of the
1 will be loaded into the memory, otherwise
1 whole words will be accepted. I.e. if the
1 whether the word to be searched for must
1 when you press ENTER or SYMBOL
1 version of THE WRITER. To load the
1 value is 9600 baud.
1 using these options. The COPY option
1 using the INPUT/OUTPUT option:
1 using continuous form (fanfold) paper or
1 used to align numbers with decimal points
1 upper and lower case letters. I.e. if
1 unsuccessful.
1 type strings such as: "#", "Page #", "- #
1 type around the tab column. It is shown
1 two special characters ' (GRAPHICS H), in
1 top (bottom) margin. In the default case
1 to the tab column. It is shown by the
1 to the editor, activating the spooler.
1 to print a document stored on Microdrive
1 to make it work with your printer and
1 to insert printer control codes within
1 to have a correct result at printing
1 to define the text format. The default
1 to define the interface used to connect
1 to change the screen colours. Note that
1 thus leaving everything unchanged, or
1 three lines in length, we will have:
1 this paragraph). The RIGHT option uses a
1 there is a page change every (60-3-3) 54
1 there are less than 6 columns in a line.
1 then it requests a filename and a drive
1 then fetched from the Microdrive, and the
1 the transmission speed of the printer, if
1 the top of the screen.
1 the top of each page.
1 the text. These will be sent to the
1 the tabulate key 'BREAK' the cursor will
1 the standard letter. There are no
1 the screen will scroll sideways when the
1 the program prevents you from choosing an
1 the program for a CENTRONICS H80, or an
1 the processing speed and increase the
1 the paper.
1 the page and copy being printed. You can
1 the other four options select one of the
1 the only available option.
1 the last character at the right margin
1 the footer are on the outside edge of
1 the file held in memory is the same as
1 the editor.
1 the drive number will be requested.
1 the datafile determines how many letters
1 the cursor position. The WRITE option
1 the control codes to change print style.
1 the computer to your printer.
1 the character with which the line will be
1 the bottom of each page.
1 the block of text, including the two
1 the ZX Interface 1 is used. The default
1 the TEXT option at the top of the dialog
1 the PROCEED option within the MONITOR THE
1 that present on Microdrive or tape. The
1 that of continuing the printing halted
1 text will not be printed. Similarly, the
1 tabulate key (BREAK) again or by using
1 tabs using a new character.
1 tables as follows:
1 tab is shown in the ruler line by the
1 suit your printer, use the END option to
1 such a powerful word processing program
1 style. 'Ignore style' uses the print
1 style currently selected on the printer;
1 string. It is still possible to type any
1 string, starting from the cursor
1 string, "GOODBYE" will be inserted if
1 string is "bank", the FIND NEXT option
1 string (or the occurrence pointed by the
1 starting and ending page numbers.
1 standard letters without writing any
1 specified more than once within a line;
1 special character, by eventually entering
1 special character in extended or graphic
1 space required to store the file. The
1 sound. INK, PAPER and BRIGHT can be used
1 single sheets. In the second case, when
1 simply be moved to the tab column. A left
1 shown in the input box, but will be
1 showing the numbers of the currently
1 sheet before printing each line. It
1 sending a text from THE WRITER program to
1 selecting the input box, under the
1 selected using the 'PAGE NUMBER FORMAT'
1 select the INSTALL DRIVER option.
1 select options such as MONITOR THE
1 searched for. I.e. typing "beg?n" as the
1 searched for. I.e. if the find string is
1 searched for within the text. During
1 searched for only if UPPER/LOWER CASE is
1 search for "they", even if it is contains
1 saved with the file). "Bell column"
1 same key WITH CAPS SHIFT DISABLES the
1 ruler line colour is set automatically
1 rrrrrrrrrrrrrrrr((((x(((((((((((ryyyyyyyyyyyyxxyhoxhhhhhhhhhhhh(ryyyyyzzzzzzzzzxxxoh
1 right-aligned' format. The CENTRED option
1 right margin column. The default value is
1 right and left margins in such a way that
1 return to the main dialog box. You can
1 required information, enclosed between
1 requested (press ENTER to use the cursor
1 replaced text will be automatically
1 replace the occurrences of the find
1 replace the next occurrence of the find
1 reformed according to the current text
1 records containing the information are
1 program. The communication program is
1 program you should type the following
1 program that allows you to copy texts
1 procedure, and all of the automatic
1 printing. The latter has two functions:
1 printing the header/footer in bold, or in
1 printing of the page containing the
1 printing is taking place you can also
1 printing a text with respect to the use
1 printers, but it is not possible to use
1 printer type. The default option installs
1 printer to change print style, i.e. to
1 printed with normal arabic numerals, from
1 printed page and copy. If the box does
1 printed must be present on Microdrive;
1 printed in the central line. If top
1 print spooler (see manual).
1 pressing the tabulate key, BREAK. The
1 pressed to use the cursor column.
1 press ENTER.
1 present in the FILE menu. It allows you
1 powerful option it is necessary to have
1 possible to modify this value (i.e.
1 possible to continue typing the text.
1 possible to choose between upper and
1 position. The paragraphs containing the
1 point' code (normally 46, the ASCII code
1 pertinent to the printing of a text. To
1 performed while printing
1 particular limits on the maximum number
1 particular information such as addresses,
1 parametrs related to the insertion of
1 parameters. To do this, select the EDIT
1 paper. To continue the printing, select
1 page, and on the LEFT side of each
1 p@@@p P P P P
1 options: TERMINATE and PROCEED. The
1 options. The default format is 'NUMERIC'.
1 options. In this way it is possible to
1 options will have no effect.
1 option; headers and footers are printed
1 option. It works with almost all
1 option is BLANK that ignores this
1 only with Microdrives) is fundamental to
1 only available using the Microdrive
1 on which I/O channel is selected when
1 on the right side of each page, i.e. with
1 on the RIGHT side of each ODD-numbered
1 of the find string with the change
1 of the current tabs.
1 of the PRINT command. The file to be
1 of fields in the datafile, apart from the
1 occurrences of the find string will be
1 occurrences of the find string that are
1 occurrence of the FIND string. Note that
1 number. If the given file is present, it
1 number will be required, and ENTER can be
1 number will automatically change
1 number of spaces to be inserted in the
1 number of lines present on each page
1 number in alphabetic form: a, b, c,
1 now either turn off the computer, if you
1 not connected to the Spectrum, TAPE is
1 not appear immediately, hold down a key.
1 next option installs the program for a
1 necessary to print the whole text in
1 names, etc. This information must be held
1 must install the copy on cartridge, so as
1 move the cursor to the beginning of an
1 move blocks of text from one file to
1 messages VERIFY ERROR or TAPE LOADING
1 message, insert the new value and then
1 memory using the current I/O channel.
1 memory (ALL), or only some pages (RANGE);
1 marked block of text.
1 margin=0, or header margin=0, the header
1 margin=0 or footer margin=0.
1 margin). In the edited text, the page
1 margin up to the column 127; in that case
1 margin column. The default value is 0. It
1 lower case roman numerals (i.e. XII and
1 listings or any text that requires no
1 lines of text (except for the forced page
1 line, it will be, using for example the
1 line, WITHIN TOP MARGIN, in which the
1 line should be displayed.
1 letter. The number of records present in
1 left side of each page, i.e. starting
1 justified) and the current margins. BREAK
1 is therefore changed.
1 is the special PRINT MERGE option,
1 is taking place
1 is printed without using the PRINTMERGE
1 is loaded.
1 is advisable not to use a left margin
1 interface. To do this you must load the
1 installation program with the following
1 inserting the ASCII code for the 'comma'
1 insert printer control codes (see chapter
1 insert a corrispondent leader.
1 input you can insert any letter, digit or
1 information is inserted into the printed
1 inexistent page, it will be moved to the
1 indicates the column at which the 'bell'
1 indent margin value is automatically set
1 indent column is shown in the ruler line
1 in the latter case you must specify the
1 in roman numerals, from 1 to 3999. It is
1 in a datafile present on Microdrive,
1 implement 'glossaries', or to merge two
1 ignored by the formatting operations: if
1 if you have selected the FOOTER option)
1 if WHOLE WORD is enabled, only the
1 i.e. equal to the left margin value, so
1 hh(ryzzzzzzzzzxxxxppohhhhhhhhhhhhh(ryyzxxxxxxx88xpphhhhhhhhhhhhhhh(ryyzxjjxxxx88pp8888hhhhhhhhhhhh(ryyzxbbxx888pp8888:88hhhhhhhhhh(ryyzxxxxx888p888888888888hhhhhh(ryyzxxxxxx8px888888888888hhhhhh(ryyzxxxxxx888888(==888888hhhhhh(ryyzxxxxxx888
1 headers and footers in the printed text.
1 header/footer print format. The LEFT
1 header will be printed, or the line,
1 have changed some parameters by mistake,
1 has a very sophisticated printmerge
1 handling. A block of text is marked with
1 greater than 0, because it will decrease
1 graphic characters will not be correctly
1 good word processors have this capacity,
1 from the left margin column. The RIGHT
1 from memory. A confirmation is needed so
1 from a source to a destination of
1 from a right tab either by pressing the
1 from Microdrive, and then inserts it at
1 former can be used to terminate the
1 formatting procedures. Disable the
1 formatting operation.
1 format. This is an alternative option of
1 format, because it means the header and
1 format prints the header (footer) on the
1 format is opposed to the preceding one
1 format is LEFT, which produces
1 format defined by the PAGE NUMBER FORMAT
1 format (left, right, centred or
1 for the full stop character). It is
1 for a page change, and that of returning
1 footer text: it will be expanded to the
1 footer text will not be printed if bottom
1 following styles: Emphasized, Elite,
1 following dialog box will appear:
1 following cases:
1 following a decimal point '.'. It can be
1 first page in the file (this parameter is
1 find string, "begin", "begun" and
1 find string is "the", FIND NEXT will not
1 find string and "goodbye" as change
1 filled until the tab column. The default
1 filing program such as THE FILER. The
1 filename. The RETURN TO EDITOR opr2[
1 filename is requested, and the file will
1 file on Microdrive will not be modified).
1 file from Microdrive. The filename and
1 feature. The "...." option produces
1 fact that each record cannot exceed 6500
1 existing documents within a letter, to
1 exchanging texts between programs are
1 etc. will be searched for.
1 end of the file.
1 enable or disable the word-wrap
1 emphasize, underline, etc. The following
1 editor, or select the OK option. In this
1 editor EXTD-A control) allows you to
1 each paragraph the cursor will be
1 each page, if you print on both sides of
1 each page has been printed a 'beep' will
1 during the printing of a text (using the
1 during searching, all words containing
1 driver, you may want to modify some
1 different type. The possibility of
1 different printer, select the CUSTOM
1 dialog box:
1 dialog box will be shown:
1 dialog box will appear on the screen:
1 delete a tab. The tab column is first
1 defines the editor priority over the
1 default values, which results in the
1 d,..., z, aa, ab,... Again you can choose
1 cursor) with the CHANGE string.
1 cursor reaches the screen margin at
1 cursor position. The DELETE option clears
1 current textfile
1 current page number at print time, in the
1 creates a Microdrive file holding the
1 created by a BASIC program or by a proper
1 correctly searched for.
1 copies to be printed. The PRIORITY option
1 copies the marked block of text to the
1 commands is the Microdrive. Selecting the
1 command. With print merge, you can write
1 command is issued to load a text.
1 column. The CENTRE format is the default
1 column 63. It is not possible to set the
1 characters. Remember that the key WITHOUT
1 characters past the right margin, so as
1 characters by typing a question mark: '?'
1 character, 44), so as to align decimal
1 character of the name is a full stop
1 character can be used in the header/
1 change a parameter you should select the
1 centres the text between the two margins.
1 centred between the current margins. The
1 case, the top and bottom margins are
1 case the printing will begin, and the
1 can write the field names holding the
1 can either press BREAK to exit from the
1 can be used to abort the command.
1 bytes in length. The field names can be
1 by using this option.
1 by the letter R.
1 by the letter C.
1 but it allows the text to be left-aligned
1 but in rather limited forms. THE WRITER
1 breaks, insertable with SYMBOL
1 box must first be used to define the
1 blocks within the same document.
1 between upper and lower case letters.
1 between the two markers can be handled
1 beginning of a given page. If you try to
1 be used instead. If the ZX Interface 1 is
1 be selected however.
1 be loaded from tape. If the first
1 be equal to the find string as regards
1 be emitted from the printer, and printing
1 be displayed on the screen using this
1 automatically moved to the next
1 automatically moved to that column (i.e.
1 at least one Microdrive. Select "HELP,
1 as to have no 'autoindentation'. The
1 as to avoid involuntary deletions.
1 are the default effects of the control
1 are directly compatible with these. The
1 are automatically saved with the texts,
1 appear, with the driver's name shown at
1 any control key such as CAPS LOCK or
1 any character in that position will be
1 another, while COPY can be used to copy
1 another computer and vice versa, or of
1 and, thus, headers or footers are printed
1 and are thus modified when an OPEN
1 and LEADER options. Again the column
1 among the possible uses of such a
1 altering the existing text; the filename
1 also terminate the printing or return to
1 allows you to print a text, but with
1 allows you to centre the text on paper.
1 allow you to select the 'global' print
1 according with the INK/PAPER values. The
1 according to this parameter. Normally
1 accept the whole word "the" in the
1 able to print with these styles, some
1 a tab of the type specified by the TYPE
1 a return to the editor is made without
1 a GRAPHICS M starting character, and a
1 Writer, The - Side B
1 WordStar file through RS232
1 WordStar file from RS232
1 Whole word
1 While the file is being printed it is
1 When you have defined all parameters, you
1 WRONG FILE TYPE
1 WRITER should insert the information, you
1 WRITER -
1 WRITER
1 WRITE/INCLUDE can also be used to include
1 WRITE FILE
1 WITHIN BOTTOM MARGIN, in which the footer
1 VERIFY option
1 VERIFY ERROR
1 Using the FIND NEXT option (or the editor
1 Using margin=3, the header (or the footer
1 Using THE WRITER for the first time, you
1 Upper/lower case
1 UPPER/LOWER CASE is enabled, and the find
1 UPPER/LOWER CASE disabled) "hello" as
1 Typing "???" as the find string, all
1 Translate codes
1 Top margin:
1 This option works in two ways, depending
1 This option allows you to delete a named
1 This is the FORMAT dialog box:
1 This dialog box allows you to set some
1 This action cannot be
1 There are five different formats,
1 The small white square beside the word
1 The parameter 'top margin' defines the
1 The parameter 'page length' defines the
1 The parameter 'left margin' indicates the
1 The parameter 'bottom margin' defines the
1 The last option, 'Margin', defines the
1 The header/footer text can be inserted
1 The four subsequent options defines the
1 The four BLOCK options concern block
1 The four 'TEXT FORMAT' options allow you
1 The following is the EDIT dialog box:
1 The five options at the top on the right
1 The dot leader is automatically inserted
1 The directory of a given Microdrive will
1 The characters GRAPHICS 1, 2, 3, 4, 5, 6,
1 The WRITE/INCLUDE facility (available
1 The TEXT dialog box is as follows:
1 The TABS option shows the following
1 The SEARCH dialog box is the following:
1 The PRINTER INTERFACE options allows you
1 The PAPER option defines whether you are
1 The PAGES option defines whether it is
1 The MONITOR THE PRINTER box has two
1 The LEADER options allows you to define
1 The INCLUDE option reads a text
1 The FIND option requests a string to be
1 The DECIMAL option defines the 'decimal
1 The COPIES option defines the number of
1 The CHANGE option requests a string to
1 The BAUD RATE option allows you to set
1 The 'right margin' value defines the
1 The 'left margin' value defines the left
1 The 'indent margin' value defines the
1 The 'WORDWRAP' option allows you to
1 The 'UPPER/LOWER CASE' option defines
1 The 'SET TAB' option allows you to insert
1 The 'ROMAN' format prints the page number
1 The 'OK' option replaces ALL occurrences
1 The 'ERASE TAB' option allows you to
1 The 'ERASE ALL TABS' option deletes all
1 The 'CHANGE CURRENT' option (or the
1 The 'ALPHABETIC' format prints the page
1 THE WRITER will then reform the text (the
1 THE WRITER microdrive file
1 THE WRITER file from drive
1 THE WRITER comes with a communication
1 THE WRITER Version 1.4
1 THE WRITER INSTALLATION MENU
1 THE WRITER COMMUNICATION PROGRAM
1 TEXT FORMAT
1 TABS option
1 Superscript
1 Set ruler line EXTD-Z
1 Selecting this option you can verify that
1 Selecting one of the options 'header' and
1 SS=Symbol shift
1 SHIFT-ENTER). The default value is 0,
1 SHIFT-ENTER).
1 SEARCH MENU
1 SAVE option
1 Roman (upper)
1 Roman (lower)
1 Right margin
1 Right align cursor line EXTD-E
1 Return to BASIC EXTD-B
1 Remember that the four PAPER parameters
1 RULER option defines whether the ruler
1 ROM Loader
1 RETURN TO EDITOR
1 QUIT option
1 Proportional
1 Printmerge format
1 Printmerge delimiter GRPH-H
1 Printer interface
1 Printer driver
1 Print merge
1 Pressing ENTER you will accept the
1 Press M for Kempston Mouse, J for Kempston Joystick, K for Keyboard
1 Position marker GRPH-G
1 Please confirm your choice
1 Paragraph reform SS-Y (AND)
1 Pages: @ All O NLQ
1 Page number format
1 Page number
1 Page length:
1 Page being printed:
1 PROCEED (A to quit)
1 PRINTMERGE deletes the
1 PRINTER, SAVE, etc. Some options such as
1 PRINTER box.
1 PRINTER CONTROL CHARACTERS
1 PRINT, FORMAT, OPEN, PAPER, QUIT cannot
1 PRINT option
1 PRINT dialog box and return to the
1 PRINT command), it shows the number of
1 PRINT MERGE option
1 PAPER option
1 PAGE NUMBER FORMAT
1 Original Release
1 One of the features that makes THE WRITER
1 OUT OF MEMORY
1 OPEN option
1 OK O Emphasized
1 O Cut sheet Priority: 2
1 O Upper/lower case
1 Note that you can ONLY ADD text to the
1 Note that the control characters are
1 Note that the CHANGE algorithm is
1 Normally this option has no effect;
1 Nonbreaking space SS-SPACE
1 Move to start of line SS-Q (<=)
1 Move to start of file SS-F (TO)
1 Move to previous word CS-3
1 Move to next word CS-4
1 Move to next paragraph EXTD-8
1 Move to end of line SS-E (>=)
1 Move to end of file SS-G (THEN)
1 Monitor the printer
1 Microdrive
1 May 5, 1986
1 MORE CODES...
1 MONITOR THE PRINTER option
1 MONITOR THE PRINTER box will appear,
1 MAILMERGE" for a complete explanation.
1 London, England.
1 Left margin:
1 Left margin
1 Left align cursor line EXTD-R
1 LOAD *"m";1;"comm"
1 LOAD *"M";1;"install"
1 Kempston, Hilderbay K
1 Justify cursor line EXTD-T
1 JUSTIFIED option uses a 'left-aligned,
1 JUSTIFIED format, justified two
1 It is possible to insert 'wild card'
1 It allows you to modify some parameters
1 Interface type
1 Interface 1, RS232
1 Installation
1 Input/Output
1 Initialization
1 Indent margin
1 Increase line spacing EXTD-S
1 In that case, the page number will be
1 Ignore style
1 If this option is selected, the document
1 If the I/O channel is the tape, then a
1 If the I/O channel is the Microdrive,
1 If WHOLE WORD is disabled, ALL the
1 INSTALLATION
1 INSTALL program
1 INSTALL DRIVER
1 INSERT/OVERWRITE mode EXTD-V
1 INPUT/OUTPUT option
1 INK colour equal to the PAPER colour. The
1 I/O channel for the SAVE, OPEN and VERIFY
1 Header and footer
1 Having modified all the parameters to
1 HELP0_OVR :
1 Go to position marker EXTD-G
1 Go to block marker EXTD-K
1 Global print style
1 Gianluca Carri
1 George....................1,200.20
1 GRPH=Graphics mode
1 GRAPHICS set on
1 GRAPHICS set off
1 GRAPHICS mode on/off CS-9
1 GRAPHICS M ending character. The text
1 GRAPHICS 8 - Enlarged
1 GRAPHICS 7 - Superscript
1 GRAPHICS 6 - Subscript
1 GRAPHICS 5 - Condensed
1 GRAPHICS 4 - Underlined
1 GRAPHICS 3 - Proportional
1 GRAPHICS 2 - Italic
1 GRAPHICS 1 - Double strike (bold)
1 GOTO PAGE option
1 GOTO PAGE 1
1 GGGGGG=8hhhhhhhh(ryyzxxxxxxxGGGGGGGGGGhhhhhhhhhh(ryyzzxxxxxxGGGGGGGGGGooohhhhhhh(ryyzzxxxxx((GGGGGGGGGoxohhhhhhh(ryyzzxxxx(
1 GGGGG88888hhhhhhh(ryyzxrxxxxx
1 Fred.....................25,000.50
1 Forced page break SS-ENTER
1 Find next occurrence EXTD-F
1 Fast scroll up SS-I (AT)
1 Fast scroll down SS-U (OR)
1 FORMAT MENU
1 FIND NEXT CHANGE CURRENT
1 Euroelectronics
1 Euroelectr.
1 Erase all tabs
1 End of page
1 End of line
1 Emphasized mode
1 Elite mode
1 EXTENDED. It is shown in the ruler line
1 EXTENDED or GRAPHICS modes.The alphabetic
1 EXTD=Extended mode
1 EXTD-F control), the cursor will be
1 EVEN-numbered page. This is an often used
1 ESC,CR,"P
1 ESC,"@
1 ESC,"7
1 ESC,"6
1 ESC,"(
1 ESC,"!,8
1 ESC,"!,4
1 ESC,"!,1
1 ERROR will appear if the verifying is
1 EPSON printer. Many dot matrix printers
1 END of the document, i.e. you MUST NOT
1 EDIT DRIVER
1 Drive number:
1 Double strike
1 Donated by thx11380!Version To Create Microdrive Copy
1 Division of Softek International Ltd.
1 Display menu bar CS-1
1 Delete marked block EXTD-D
1 Delete line SS-S (NOT)
1 Delete current word SS-A (STOP)
1 Delete current character SS-D (STEP)
1 Delete CS-0
1 Decrease line spacing EXTD-X
1 Datafile name:
1 DRIVER option. A dialog box will then
1 DIRECTORY option
1 DIABLO daisywheel printer. If you have a
1 DESTINATION
1 DELETE option
1 Cursor up CS-7
1 Cursor right CS-8
1 Cursor left CS-5
1 Cursor down CS-6
1 Copy marked block EXTD-C
1 Copy being printed:
1 Control keys
1 Control characters
1 Continuous form
1 Continuous
1 Condensed, NLQ. If the printer is not
1 Condensed mode
1 Communications
1 Change current occurrence EXTD-A
1 Centronics H80,Epson
1 Centre cursor line SS-W (<>)
1 CS=Caps shift
1 CONTROL KEYS
1 COMMUNICATION
1 CHANGE CURRENT
1 CENTRONICS H80, EPSON
1 CAPS SHIFT ENABLES the style, while the
1 CAPS LOCK on/off CS-2
1 Bottom margin:
1 Block options
1 Block marker GRPH-M
1 Below 'PRINTER DRIVER' you can select the
1 Bell column
1 Baud rate:
1 BLOCK9
1 BLOCK8
1 BLOCK7
1 BLOCK6
1 BLOCK5 s&
1 BLOCK4 (
1 BLOCK3
1 BLOCK22
1 BLOCK21
1 BLOCK20
1 BLOCK2 n
1 BLOCK19
1 BLOCK18
1 BLOCK17 P
1 BLOCK16
1 BLOCK15 I
1 BLOCK14 i
1 BLOCK13 7
1 BLOCK12 $
1 BLOCK11
1 BLOCK10D
1 BLOCK10C
1 BLOCK10B =
1 BLOCK10
1 BLOCK1
1 BLOCK ERROR
1 BEL,CR
1 As with the preceding option, PRINT MERGE
1 Alphabetic numbers can vary from 1 to 702
1 Alphabetic (upper)
1 Alphabetic (lower)
1 Allows you to save the text held in
1 Allows you to move the cursor to the
1 Allows you to delete the current document
1 All rights reserved.
1 Al6Bl6Bl6Bl6Bl6B
1 After having selected this option, the
1 After having selected the required
1 ASCII tape file
1 ASCII file through RS232
1 ASCII file from tape
1 ASCII file from RS232
1 ALTERNATE format prints the header/footer
1 ALTER the text to be printed. While
1 A RIGHT tab right-aligns the text that
1 A LEFT tab is the normal one; pressing
1 A DECIMAL tab is similar to a right tab,
1 A CENTRED tab centres the text that you
1 @@@@@@@@@@@@GGGGGGGGEGGG
1 @ Continuous Copies: 1
1 @ Whole word OK
1 <<<<<<<<<<<<<<<
1 ;"install"
1 ;"WRITER":
1 ;"NULL_DAT"
1 ;"INSTALL_CD":
1 8<<<<<<<<<<<<<<
1 7, 8 (with or without shift) can be used
1 62. It is possible to move the right
1 3-letter words will be searched for.
1 26", "- 26 -". It is also possible to
1 1985 Gianluca Carri
1 12) to change the print style thus
1 1 to 65535.
1 000000000000
1 -", that will be printed as "26", "Page
1 )TZXed by Andrew Barker
1 (similar to that of a typewriter) will
1 (margin=2), header and footers will be
1 (including the lines of top and bottom
1 (//==((++)(hhxxxxxxh(ryyzxxxx(()*//((//((h(hhxxxxxxh(ryyxxxxxx())*(((((/(h/hhxxxxxxh(ryyxxxxxx8(((*(..*((((hhxxxxxxh(ryyxxxxxxxxx((*(*.((*(hhxxxxxxh(ryyyyxxxxxxxxx(((((((hhhhhhhhhh(rrrrrrrrrrrrrrrr((((((((((pP`(((Q
1 ((hhohhhhhhh(ryyzzxxx(
1 ("."), the first file available on tape
1 'mail merge' facilities. To use this very
1 'left-ragged, right-aligned' format. The
1 'left-aligned, right ragged' texts (like
1 'italic' characters.
1 'footer', the following dialog box will
1 'autoindent' column: at the beginning of
1 'Soft' CR CS-ENTER
1 'Microdrive' indicates that the current
1 'Header' ('Footer') word. The '#'
1 'Hard' CR ENTER
1 '----' and '_____' options will obviously
1 ''("KEYBOARD"
1 ''"PRESS ANY KEY TO FORMAT"'"MICRODRIVE 1"
1 ''"JOYSTICK installed":
1 '"FINISHED - THE WRITER READY IN MICRODRIVE 1":
1 "the" as a sub-string. It will only
1 "the! book!", "the, book", etc.
1 "the book", "(the book)", "(the) book",
1 "intelligent": if you type (with
1 "he", both "he", "the", "they", "help",
1 "began", etc. will be searched for.
1 "Page number" defines the number of the
1 "HELLO" is found, etc.
1 "Bank", "BANK" or "BAnk". These will be
1 "''"THE WRITER"'"
1 THE WRITER -
1 THE WRITER
1 PRINTMERGE -
1 PAGE NUMBER FORMAT
1 O Roman (upper)
1 O Roman (lower)
1 O Left O Right
1 O Alphabetic (upper)
1 O Alphabetic (lower)
1 Margin: 2
1 Header (Footer)
1 FILE EDIT TEXT SEARCH FORMAT HELP
1 COPYRIGHT 1985,1986
1 COMM program -
1 @ Numeric
1 @ Centre O Alternate
1 85/86 Gianluca Carri
1 1986 Gianluca Carri
1 1985,1986 SOFTECHNICS"'"Written by Gianluca Carri"
1 (Input box)
1 by Gianluca Carri
1 THE WRITER HELP MENU
1 Right O ..... O
1 Left @ Blank @
1 Include Bell column 60
1 Erase tab
1 Erase all tabs
1 Decimal O _____ O
1 Copy Page number 1
1 Centred O ----- O
1 by Gianluca Carri
1 by Gianluca Carri
1 GIANLUCA CARRI
1 TYPE LEADER
1 Header
1 Footer
1 Wordwrap @
1 Top margin: 3
1 THE WRITER
1 Right margin 62
1 Page length: 60
1 O Right O Justified
1 O Tape
1 Left margin: 8
1 Left margin 0
1 LINE 3
1 LINE 2
1 LINE 1
1 Indent margin 0
1 Bottom margin: 3
1 @ Left O Centred
1 @ Microdrive
1 O Range: 1 1
1 CR,LF
1 STOP THE TAPE
1 TEXT FORMAT
1 PAPER 0
1 INK 7
1 BRIGHT 0
1 O Elite
1 O Condensed
1 @ Ignore style
1